Rockwell RK7240.1 13 Amp 10-Inch Table Saw with Stand
- Lightweight and easy to transport
- Large safety on/off switch for enhanced control and operator safety
- Reinforced cast aluminum table top for greater stability and precision
- Quick Lock rip fence for quick and easy use with larger stock pieces
- Integrated dust collection port for easy vac attachment
Adjust cutting depth and overload protection. Aluminum main table with Quick release rip fence, 0-45 degree and blade bevel. Table size 26″ x 16″. Max cutting depth at 90 degree = 3″ ; Max cutting depth at 45 degree = 2-1/2″. Accessories include: Spanner Wrench; Blade: 10″ x5/8″ x 24T; Rip Fence; 45 degree Miter Gauge; Push Stick.
Rating: 
(out of 7 reviews)
List Price: $ 230.28
Price: $ 129.99
[wprebay kw="tablesaw" num="2" ebcat="all"] [wprebay kw="tablesaw" num="3" ebcat="all"]
Review by Rod for Rockwell RK7240.1 13 Amp 10-Inch Table Saw with Stand
Rating:
Saw had an alignment problem. Splitter was bent, causing a blockage of wood piece.
Had to bend splitter. Guard locking handle will cause blockage, if above table height. After adjustments, saw has plenty of power and for the price is O.K.item.
Review by Mike M. Sergieff for Rockwell RK7240.1 13 Amp 10-Inch Table Saw with Stand
Rating:
Found overall quality poor, especially the accesories. Guide was tricky to clamp doen with any accuracy, blade vibration from the very start and in general, the product not worthy of tne namesake.
Review by Mommy to Kyle for Rockwell RK7240.1 13 Amp 10-Inch Table Saw with Stand
Rating:
Cannot put a dato blade on it. Shaft is too short. Saw dust comes out the face plate. Miter groove is only 5/8 and shallow.
Review by Juan M. Mencia for Rockwell RK7240.1 13 Amp 10-Inch Table Saw with Stand
Rating:
This is truly a portable as far as weight is concern. The only deficiencies I see in this model is the rather flimsy blade height adjusting wheel, and the absence of a zero clearance blade plate option, which plate is also shimmed rather poorly because they are loose and rather not easy to reposition once you remove the plate to change blades. Other than that is a fine little machine with a powerful motor and nice stand. For the money you can’t go wrong, it’ll do the same job as other much more expensive 10″ saws. It’s kind of a Deja VU to the old Makita little “Green” portable that I used to own, and was looking for when I came across this one.
Review by Leslie E. Spokany for Rockwell RK7240.1 13 Amp 10-Inch Table Saw with Stand
Rating:
Solid small hobby type machine. Comes packed perfectly, no missing or faulty parts. Fence is good for this price. No zero clearance slot available so dado’s are tricky.
Over all a winner